; Listing 3.3.
; Program to illustrate operation of set/reset circuitry to force
;  setting of memory that already contains data.
; Assembled with TASM 4.0, linked with TLINK 6.10
; Checked by Jim Mischel 11/21/94
;
stack   segment para stack 'STACK'
        db      512 dup(?)
stack   ends
;
EGA_VIDEO_SEGMENT       equ     0a000h  ;EGA display memory segment
;
; EGA register equates.
;
SC_INDEX        equ     3c4h    ;SC index register
SC_MAP_MASK     equ     2       ;SC map mask register
GC_INDEX        equ     3ceh    ;GC index register
GC_SET_RESET    equ     0       ;GC set/reset register
GC_ENABLE_SET_RESET equ 1       ;GC enable set/reset register
;
; Macro to set indexed register INDEX of SC chip to SETTING.
;
SETSC   macro   INDEX, SETTING
        mov     dx,SC_INDEX
        mov     al,INDEX
        out     dx,al
        inc     dx
        mov     al,SETTING
        out     dx,al
        dec     dx
        endm
;
; Macro to set indexed register INDEX of GC chip to SETTING.
;
SETGC   macro   INDEX, SETTING
        mov     dx,GC_INDEX
        mov     al,INDEX
        out     dx,al
        inc     dx
        mov     al,SETTING
        out     dx,al
        dec     dx
        endm
;
cseg    segment para public 'CODE'
        assume  cs:cseg
start   proc    near
;
; Select 640x480 graphics mode.
;
        mov     ax,012h
        int     10h
;
        mov     ax,EGA_VIDEO_SEGMENT
        mov     es,ax                   ;point to video memory
;
; Draw 24 10-scan-line high horizontal bars in green, 10 scan lines apart.
;
        SETSC   SC_MAP_MASK,02h         ;map mask setting enables only
                                        ; plane 1, the green plane
        sub     di,di           ;start at beginning of video memory
        mov     al,0ffh
        mov     bp,24           ;# bars to draw
HorzBarLoop:
        mov     cx,80*10        ;# bytes per horizontal bar
        rep stosb               ;draw bar
        add     di,80*10        ;point to start of next bar
        dec     bp
        jnz     HorzBarLoop
;
; Fill screen with blue, using set/reset to force plane 0 to 1's and all
; other plane to 0's.
;
        SETSC   SC_MAP_MASK,0fh         ;must set map mask to enable all
                                        ; planes, so set/reset values can
                                        ; be written to memory
        SETGC   GC_ENABLE_SET_RESET,0fh ;CPU data to all planes will be
                                        ; replaced by set/reset value
        SETGC   GC_SET_RESET,01h        ;set/reset value is 0ffh for plane 0
                                        ; (the blue plane) and 0 for other
                                        ; planes
        sub     di,di
        mov     cx,80*480               ;# bytes per screen
        mov     al,0ffh                 ;since set/reset is enabled for all
                                        ; planes, the CPU data is ignored-
                                        ; only the act of writing is
                                        ; important
        rep stosb                       ;perform fill (affects all planes)
;
; Turn off set/reset.
;
        SETGC   GC_ENABLE_SET_RESET,0
;
; Wait for a keystroke.
;
        mov     ah,1
        int     21h
;
; Restore text mode.
;
        mov     ax,03h
        int     10h
;
; Exit to DOS.
;
        mov     ah,4ch
        int     21h
start   endp
cseg    ends
        end     start

